TES 2-1223H

DC/DC Converter TES 2H Series, 2 Watt • • • • • • I/O isolation voltage 1'500 VDC • • High accuracy of pin co-planarity • • Available in tape and reel package Unregulated device Single and dual output models Input voltage 5, 12 and 24 VDC High efficiency up to 80% Operating Temperature range -40 to +90°C Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020E With their small footprint these 2 Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. 3-year product warranty Models Order Code Input Voltage Range TES 2-0510H TES 2-0511H TES 2-0512H TES 2-0521H TES 2-0522H TES 2-0523H TES 2-1210H TES 2-1211H TES 2-1212H TES 2-1222H TES 2-1223H TES 2-2410H TES 2-2411H TES 2-2412H TES 2-2422H TES 2-2423H www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC +12 VDC +15 VDC 500 mA 400 mA 165 mA 200 mA 83 mA 66 mA 500 mA 400 mA 165 mA 83 mA 66 mA 500 mA 400 mA 165 mA 83 mA 66 mA November 30, 2022 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 200 mA 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA typ. 70 % 73 % 77 % 74 % 76 % 76 % 72 % 75 % 79 % 80 % 80 % 72 % 75 % 79 % 79 % 79 % Page 1 / 5 TES 2H Series, 2 Watt Input Specifications Input Current - At no load 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: - At full load Surge Voltage Under Voltage Lockout Recommended Input Fuse Input Filter 60 mA typ. 30 mA typ. 15 mA typ. 500 mA typ. 200 mA typ. 100 mA typ. 9 VDC max. (1 s max.) 18 VDC max. (1 s max.) 30 VDC max. (1 s max.) 8 VDC typ. 16 VDC typ. 34 VDC typ. (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation - Input Variation (1% Vin step) Ripple and Noise Capacitive Load - Load Variation - Voltage Balance (symmetrical load) - 20 MHz Bandwidth - single output - dual output single output models: dual output models: See application note: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection ±3% max. (at 60% load, 3.3 & 5 Vout models) ±3% max. (at 100% load, other output models) 1.5% max. 1.5% max. www.tracopower.com/overview/tes2h 1% max. 120 mVp-p max. 47 µF max. 47 µF max. 10 µF max. 10 / 10 µF max. 4.7 / 4.7 µF max. 4.7 / 4.7 µF max. 2 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 50 ms max. Limited 0.5 s max., Automatic recovery EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EN 55032 class A (with external filter) EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/tes2h General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Switching Frequency Insulation System - Operating Temperature - Case Temperature - Storage Temperature - High Temperature 95% max. (non condensing) –40°C to +90°C +105°C max. –50°C to +125°C 4 %/K above 80°C See application note: www.tracopower.com/overview/tes2h Natural convection (20 LFM) 50 - 120 kHz (PFM) 100 kHz typ. (PFM) Functional Insulation All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 2 / 5 TES 2H Series, 2 Watt Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Moisture Sensitivity (MSL) Washing Process Housing Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Soldering Profile Weight - single output - dual output Environmental Compliance - REACH Declaration - RoHS Declaration 1'500 VDC 1'800 VDC 10'000 MΩ min. 60 pF typ. 100 pF max. 2'000'000 h (MIL-HDBK-217F, ground benign) Level 2 (J-STD-033C) Not allowed (vent-hole without membrane) Non-conductive Plastic (UL 94 V-0 rated) Phosphor Bronze (C5191) Copper (1 - 3 µm) Tin (7.5 µm min.), matte Plastic Case PCB Mount SMD (Surface-Mount Device) SMD8 (single output models) SMD10 (dual output models) Reflow Soldering (J-STD-020E) 1.5 g 2.2 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tes2h All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 3 / 5 TES 2H Series, 2 Watt Outline Dimensions (0.02) (0.004) 0.1 M (0.01) Ø1.0 (Ø 0.04) vent hole 6.15 (for reflow soldering process) (0.24) R0 0.25 (0.35 ±0.02) 1.5 (0.06) . (R 0. 5 02 ) 0.3 0.6 (0.01) 8.9 ±0.5 Single Output Models Pinout Pin Single 1 –Vin (GND) 2 +Vin (Vcc) 4 –Vout 5 +Vout 8 NTC ° 0-4 NTC: Not to connect 3.0 (0.12) 1 2 3.04 2.54 (0.12) (0.48) 9.3 3.0 (0.12) 12.3 5 (0.37) 8 4 5.08 (0.1) All dimensions in mm (inches) Tolerance: x.x±0.25 (x.xx±0.01) Tolerance: x.xx±0.13 (x.xxx±0.005) (0.2) 13.7 (0.54) 3.0 (0.12) (0.004) 0.1 M (0.24) 4 1 –Vin (GND) 2 +Vin (Vcc) 4 Common ) .5 02 (R 0. R0 Dual ° 5 –Vout 7 +Vout 10 NTC (0.48) 12.3 5 5.08 2.54 (0.2) (0.1) 16.24 Pin NTC: Not to connect 9.3 3.04 2.54 Pinout 0-4 7 2 (0.1) (0.01) (for reflow soldering process) (0.12) (0.12) 0.25 8.9 ±0.5 0.3 6.15 3.0 1 1.5 (0.06) Ø1.0 (Ø 0.04) vent hole (0.37) 10 (0.01) 0.6 (0.02) (0.35 ±0.02) Dual Output Models All dimensions in mm (inches) Tolerance: x.x±0.25 (x.xx±0.01) Tolerance: x.xx±0.13 (x.xxx±0.005) (0.64) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 4 / 5 TES 2H Series, 2 Watt Recommended Solder Pad Layout 2.2 (0.09) 1.2 min. (0.05) (0.54) (0.05) 13.7 2.2 1.2 min. (0.54) 13.7 Dual Output Models (0.09) Single Output Models 2.54 5.08 2.54 5.08 2.54 (0.1) (0.2) (0.1) (0.2) (0.1) Dimensions in mm (inch) © Copyright 2022 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. November 30, 2022 Page 5 / 5